Greene/Greene inspired entry table

It has been a while since I last posted.  Thought I’d post some pics of my lasted project, an entry table.  It will be functional for the space where it’s going.  I tried to make top seem as if it were floating with a Greene and Greene style.  I’ve seen a similar table, but I drew this up on sketchup.

It’ll match a desk I’ve been working on.

It was also a chance to use a new toy.  I just got a Festool Domino XL.  Worked wonderfully.

Since I was going to use loose tenons, I cut the planed and joined pieces to length.  I used hard curly maple for the top and QS white oak everywhere else.  I had to hand plane the top first.  It was too wide for my 8″ joiner.

I tapered the front/back legs at table saw.

I rough cut the cloud lift features at bandsaw and sanded to get one piece which then became a template for the others.  I then used a flush trim router bit with double-sided tape to duplicate the pieces.

Afterwards, I rounded over all the edges and sanded before assembly.

Then came the loose tenons.  I used the Domino, which was awesome.  I have to say I did get good service from Bob Marino which is where I bought the domino online.

It is well-balanced and precise.  I sold a couple of tools I hadn’t used in a long while to help offset some of the cost.

Anyway, glued up and did some final sanding.

I made a fuming box with some 1×2 and covered it with plastic drop “cloth”.  Then, I placed concentrated ammonia (with protective gloves, eyewear, etc) in the fume box at a temp of approx 55 Fahrenheit for about 48 hours.

Still have to put a protective top coat, but am thinking about what to use.  Hope it finishes well.

Thanks for reading.  Cheers!

Radial Arm/Miter Station 2

Well, I did some work on the radial arm/miter station the past couple days.  After thinking about the dust collection, I contemplated a dust hood, but opted for a down draft area.  I’ll do some sanding there anyways.  I cut a channel in the cabinets and lined it with hardboard…then, sealed it with some aluminum tape. I only use my radial arm occasionally and am going to just hook up a shop vac when I need it.

I made the same half-lap frame as before then topped that with the construction grade plywood, and then a sheet of hardboard.

I used a pegboard as a template and drilled holes along the course of the channel.  Then, pulled it up and drilled larger holes in the plywood.

Then, I installed both the radial arm and miter saw and adjusted them to be level with the support area.  Still have to order the drawer hardware and  make the drawers.  But that’s for another day.



Radial Arm/Miter Station

Decided where to place the miter saw So, started making cabinets which will be level with miter saw and radial arm saw.  I had seen an episode of NYW a few years back and Norm had made workshop cabinets pretty much the same way.

IMG_20151113_182547107Took a sheet of plywood and ripped to height and then cross cut with circular saw.  I ripped the remaining portion of the sheet into 4 strips.

IMG_20151113_182901113 IMG_20151113_222413310I cut notches for the plywood strips with a jig saw in the two center pieces, and used my dado blade to make rabbets in top, back and bottom of the two end pieces.

IMG_20151113_223649071 IMG_20151114_140417472-2After attaching the strips to the center pieces and then the ends with glue and screws, I leveled, shimmed and attached the unit to the wall.  I had to cut out for my dust collector pipes.

IMG_0811 IMG_0812 IMG_0813Took 2x4s and mad half-lap joints for a counter base and attached that the top.  Then cut and scribed a piece of construction plywood to the top of that, and did the same with a piece of tempered hardboard.  Next step will be to make platforms on both sides for each saw and trim it out.


Had to call it quits for the day.  Had a honey-do list to work on as well.


Back to the Shop


After over 1 1/2 years, building the house addition, a pergola,  a new shop, and many other house projects, I’m ready to get back to making some furniture.  First project from the new shop is going to be 3 cherry blanket chests.  I plan to repay two generous friends for some cherry logs.  I’m involving my kids on the chests and hopefully they will learn and come to enjoy woodworking as much as I do.  Below is a pic of some of the wood we are milling up.


I Love the Sawmill!


I love salvaging wood. A friend had two cherry trees come down last summer…and they called me. Along with my friend’s husband and a loader, I managed to get three nice cherry logs.
The first photo shows my poor trailer, loaded to it’s max with one of the logs.
I took the logs to a local sawmill this past fall, he sawed them up and dried them in his kiln. He sawed them into 8/4 stock which always seems expensive to buy whenever I need it.
Went yesterday to pick up the wood and got some really nice boards.
Here’s a pic of the trailer (with a little less weight) with all three “logs” loaded.
It makes me appreciate the possibilities of things to come.

Dormer Addition

ImageWeather has been a little bit of an issue over the past few days.  Rain intermittently, which means having to put the tarp on and off if I want to make progress.  Luckily, we had a really nice day on Saturday and we got the outside walls up.  

Two of my friend stopped by to help (one of them unexpectedly which was nice.)

We moved up the OSB sheets before putting up the wall.  I didn’t want to have to carry it all up and used a bobcat to raise it up.  


I built the walls on the second floor and attached a few pieces of sheathing which overhung the bottom of the walls.  I got this idea from the NYW when Norm made his potting shed.  We stood the walls up and attached them to the sill plate.  It worked pretty well. 



After the first wall was up, we just worked down the line.  Made some progress.  


The ridge beam, which will be two 2×10 boards sandwiched together, will be supported by the masonry on the ends.  Today, I chipped out and then cut some of the brick at the peaks.  There will be about 4 inches of support at the ends and a mid support wall for the ridge beam.  I used some concrete to level off the end supports.  I’ll let it dry, then put a piece of pressure treated lumber on it and the ridge beam on that.  But that’ll be Weds.  

Hope you all have a good day.  Thanks for reading.



Not fine woodworking, but….



I started working on a shed dormer today.  Demolition day, which is work but fun.  Had a nice day for it.  It’s amazing what you can accomplish with a circular saw and a sawzall.


The house is only about 25×30.  I built a temporary support wall before cutting the trusses.  



A buddy stopped by to help move some of the mess into the dumpster and put the tarp on.  It’s supposed to rain tomorrow.  


I’ll probably take tomorrow off as we’re also getting honeybees, and tomorrow is pickup day.    Should be fun.  Cheers.